⎝⎛斗牛平台⎞⎠

Industry Information
Common problems encountered in the disassembly of fluorine-lined centrifugal pumps
浏览次数: Time: 2018-12-17 08: 21Views :
Many people cannot disassemble the fluorine-lined centrifugal pump. The main reason is his taper connection problem. Then why the taper connection cannot be disassembled, the main reasons are as follows: 1. The user's uneven force is too small when tapping.
Many people cannot disassemble the fluorine-lined centrifugal pump . The main reason is his taper connection problem. Then why the taper connection cannot be disassembled, the main reasons are as follows:
First, the user's uneven force is too small when tapping. As a result, the centrifugal pump impeller pull rod is bent, and the power is not available.
2. The manufacturers of water pumps are processing impellers with insufficient accuracy, resulting in uneven coordination between the impeller shaft and the pump shaft, and the mating area is too small.
3. The impeller shaft and the pump shaft have not undergone quenching and tempering treatment, causing the two to engage with each other. In the subsequent running process, there is an increase in the mutual bite force during the transmission of torque. Such impellers cannot be separated.
The above 3 points are the main reasons why the fluorine-lined centrifugal pump cannot be disassembled.

Here's a disassembly video of the LHF fluorine-lined centrifugal pump:

say something
  • ) All comments ( 0 )

Copyright © Nanjing Lvhuan Pump Industry Co., Ltd. All rights reserved. Su ICP No. 07500687
Service Tel: 025-58833797 83556369 58630291 Fax: 025-58833706
Company Address: No. 1 Daqiao North Road, Pukou District, Nanjing, Anhui Factory: No. 33 Xinchang Road, Jingkai Economic Development Zone, Yin County

Customer service
phone
service line:
025-58833797 83556369 58630291
WeChat

WeChat public account

七乐彩 欢乐拼三张 欢乐拼三张 必赢真人娱乐