Design standard: ISO2858-1975 (E) Sealing method: external mechanical seal, internal mechanical seal, double-end water-cooled mechanical seal
Overcurrent material: 304, 304L, 316, 316L Applicable temperature: <200 degrees Flow range: 0--400m3 / H Head range: <125M
The IHL pump is a single-stage single-suction cantilever centrifugal pump
, which was upgraded by Green Ring
Company based on the IH pump. Its markings, rated performance points and dimensions are equivalent to the international standard ISO2858-1975 (E). It is an updated product determined by the Ministry of Machinery Industry to replace the F-type corrosion-resistant centrifugal pump. It can meet the requirements of conveying liquids with corrosive viscosity similar to water in chemical processes. The temperature of the conveying medium is generally -20 to 200 degrees (more than 120 degrees, water cooling machine seals must be equipped).
The pump uses a new hydraulic model, which is 5% more efficient than ordinary IH pumps. It has a thicker shaft diameter, longer bearing housings, larger bearings, and shorter cantilever ratio to make its performance more stable. The pump can be equipped with built-in, Exterior and container mechanical seals have a wide range of conveying media and relatively low prices. They are one of the more popular chemical pumps at
1. High efficiency and energy saving: The efficiency of IHL type chemical centrifugal pump is ~ 5% higher than that of IH pump, which is an ideal energy saving product;
2. Shaft seal: The shaft seal can be equipped with internal, external, double-end, container mechanical seals according to different working conditions;
3. Suspension components: The suspension components adopt a universal design, which has a high degree of generalization and high reliability.
4. Material: The main flow parts are made of stainless steel, which can meet the transportation of different media and have a long service life.
5. Fully sealed shaft: The shaft is sealed with a gasket and "O" ring to ensure that the shaft does not contact the medium and increase the life of the shaft. Adopt universal design, high degree of generalization.
Performance parameter table: